A354 - Stainless Steel Fastners
| Raw Material | ASTM A354 Gr.BC Ed.2017e2 |
|---|---|
| C % | 0.30-0.53 |
| P % | 0.035 Max. |
| S % | 0.040 Max. |
Stainless Steel A354 Fasteners Manufacturers, Exporters & Suppliers in India
When deciding on a fastener, it is a good idea to consider the Stainless Steel A354 specification. This specification specifies the quality of the material and the type of coating it can accept. A354 bolts and nuts are available in a wide range of finishes, including oil-finished, tempered, and plain.
They have the same strength as A490 bolts, but without the configuration restrictions. These bolts and nuts are generally recommended for anchoring and fastening applications.
When considering a Stainless Steel A354 bolt, make sure to check the tensile strength. Grade 5.8 is lower in strength than A354 BD. However, it can be used in the same manner as the grade BD. The difference is primarily in the diameter, so the size of the bolt should be carefully considered. Also, remember that A354 BC bolts are compatible with A194 nuts.
As far as corrosion resistance is concerned, A354 alloy is a good choice for fasteners in high-moisture environments. Besides being non-magnetic, this type of stainless steel offers 75,000-psi tensile strength. Moreover, it is easy to clean. Stainless Steel A354 fasteners are ideal for many applications and can be found at Lightning Bolt & Supply.
ASTM A354 Fasteners come in a variety of sizes. The most common fastener type is the fully threaded stud, which is widely available in metric and nonmetric sizes. Other common sizes include full-thread rods, carriage bolts, and studs. If you need a custom size, Steel Tubes India can manufacture it for you. All of these options can be ordered through our online store.
When choosing a fastener, be sure to choose a vendor with extensive experience and application expertise. Be wary of vendors based in low-cost countries, as there are often counterfeit materials on the market. Choosing a vendor with a reputation for high-quality materials and responsiveness is just as important as selecting the right materials.
A 354 specification describes the chemical and mechanical properties of alloy steel fasteners. These fasteners are required to conform to the chemical composition requirements of ASTM A354 specification. Depending on the intended use and stress conditions, Grades BC and BD may be used.
However, it is imperative to use the proper torque when installing these fasteners. Overtightening will cause the threads to yield and cause friction between the two surfaces.
Back