A420WPL6 - Carbon Steel Hot Induction Bends
| Raw Material | ASTM A 420 WPL6 Ed. 2020 |
|---|---|
| C % | 0.300 Max. |
| Mn % | 0.50-1.35 |
| P % | 0.035 Max. |
| S % | 0.040 Max. |
| Si % | 0.15-0.40 |
| Cr % | 0.30 Max. |
| Mo % | 0.12 Max. |
| Cu % | 0.40 Max. |
| V % | 0.08 Max. |
| Cb % | 0.02 Max. |
Carbon Steel A420WPL6 Hot Induction Bends Manufacturers, Exporters & Suppliers in India
You may be wondering what these A420WPL6 Hot Induction Bend products are. Well, this article aims to answer that question. First, we'll examine their features. Carbon steel A420WPL6 Hot Induction Bends is manufactured from carbon steel that has been through a normalizing process. In addition, they are ideal for draining low-temperature effluents.
This material is the most popular among other types of pipe bends. It is fast and efficient and has minimum errors. The nominal diameter of the bend determines the radius. It is available in carbon steel, low alloy, and bi-metal alloys. As such, the bending process is a cost-effective way to make quality bends. Listed below are several types of hot induction bends.
The bending plant is mounted on a base frame. The base frame supports the rolls and pipe carriage. The main pivot track and radius arm assembly are mounted on the base frame. The system uses a push drive system involving a DC electric power motor and a gearbox to provide accurate speed control.
The induction power pack is ASTM / ASME A 234 GR. WP 1. Its configuration is 3-plane. Once the coil has been installed, the pipe moves through the bending process.
ASTM A420WPL6 Carbon Steel Elbows are manufactured using the same quality standards as ASTMC A234 WPB. As a result, these bends are suitable alternatives to precipitation-hardening stainless steel and 300-series carbon steel.
They are highly affordable and are easily available. So, if you're looking for an A420WPL6 Hot Induction Bend, you've come to the right place! There's no reason not to buy one!
Hot Induction bends are a convenient, high-quality option for bending large and long sections of pipe. They are approved by Shell Global, EIL, and Saudi Aramco. You can also choose between forged, roped, and wrinkle bends.
Back