B8F - Stainless Steel Fastners
| Raw Material | ASTM A 320 Gr.B8F, B8FA Ed.2021 |
|---|---|
| C % | 0.15 Max. |
| Mn % | 2.00 Max. |
| P % | 0.20 Max. |
| S % | 0.060 Max. |
| Si % | 1.00 Max. |
| Cr % | 17.00-19.00 |
| Mo % | 0.15-0.35 |
Stainless Steel B8F Fasteners Manufacturers, Exporters & Suppliers in India
If you're looking for high-quality, high-performance Stainless Steel B8F Fasteners, read on. We'll cover what these fasteners are and why they're useful. You may have questions about the type of fasteners you need, but we'll cover them all. You can buy them directly from manufacturers or distributors, but knowing what to look for can help you choose the right ones.
A stainless steel fastener can be made from various metals, including alloy steel, brass, silicon bronze, and stainless steel. Its combination of material and treatment determines its strength and application. This material is suited for construction and finishing applications because of its corrosion-resistant properties.
A complete range of stainless steel fasteners is available from a distributor. Choose from carriage bolts of various sizes, hex bolts, and lag screws A354. You can also choose to buy hexagon weld nuts or other specialty fasteners, such as nut and washer combinations. They're available in full thread and half thread, and you can find them as international standards.
Stainless Steel B8F Fasteners are also available in self-drilling varieties. These types of screws are commonly used in aluminum framing and are available in a variety of head styles. For better accuracy and less thread rollover, self-drilling screws should be used with slow-speed screw guns.
316 and 18-8 stainless steel are both nonmagnetic. Both are widely used in marine applications, such as boats, yachts, and other ships. 316 stainless is nonmagnetic and does not show deep or surface corrosion. It also features the highest strength-to-weight ratio. If you're looking for a high-performance, corrosion-resistant stainless fastener, you've come to the right place.
Grade B8F bolts are typically made from AISI 304 stainless steel. They're water-quenched and have carbide solution treatments. These fasteners have a much higher cost, but they have superior corrosion resistance. The only difference between them is that type 316 stainless requires additional processes, including a carbide solution treatment and a strain hardening operation. These fasteners are also more expensive than their non-stainless counterparts.
Back