Inconel 600 (UNS No. N06600) - Nickle Alloy Forged Fittings
| Raw Material | Inconel 600 (UNS No. N06600) |
|---|---|
| C % | 0.15 Max. |
| Mn % | 1.0 Max. |
| S % | 0.015 Max. |
| Si % | 0.50 Max. |
| Cr % | 14.00-17.00 |
| Ni % | 72.00 Min. |
| Fe % | 6.00-10.00 |
Nickle Alloy INCONEL 600 (UNS NO. N06600) Fittings Manufacturers, Exporters & Suppliers in India
The INCONEL 600 alloy has a high percentage of chromium and is suitable for cold-forming applications. It is resistant to oxidizing agents and reducing conditions. Additionally, it is resistant to chloride ion corrosion stress cracking, making it cost-effective in the long run.
Chloride and hydrogen chloride do not corrode this alloy at room temperatures, which makes it a good choice for a variety of applications. High Performance Alloys stocks and produces Inconel 600, a nickel-chromium alloy that exhibits excellent oxidation resistance at high temperatures. It is also resistant to chloride and carburizing gases. It can be annealed to increase its strength or lower its machinability.
The production of INCONEL 600 (UNS NO. N06600) pipe fittings is carried out by a certified company. The company is an ISO 9001:2008 accredited manufacturer and exporter of high nickel-based special alloys, including Inconel 600. In addition to forged and threaded pipe fittings, Inconel 600 pipe fittings can also be ordered from this company. INCONEL 600 (UNS NO. N06600) pipe fittings are available in sizes ranging from 1/2" to 8" NB. Some INCONEL 601 (UNS NO. N06601) pipe fittings are also rohm-tested.
Several industries use Inconel 600 for process equipment, including nuclear engineering and fluorinated hydrocarbon production. It is also popular among heat exchanger and reactor vessel manufacturers. This alloy is ideal for applications that experience rapid temperature changes, and it can withstand high temperatures and extreme cold.
INCONEL 600 (UNS NO. N06600) is a nickel-chromium alloy with excellent heat and corrosion resistance. This nickel-chromium alloy is non-magnetic, and exhibits improved oxidation resistance compared to pure nickel. Unlike many other alloys, Inconel 600 can be cold-worked to considerably harden. The alloy can be found in both sheet and coil forms, and different stock sizes. In addition, it is highly resistant to chloride-ion stress corrosion cracking, and it has excellent chemical and mechanical resistance.
INCONEL 600 (UNS NO. N06600) is a nickel-chromium superalloy with excellent ductility, corrosion resistance, and weldability under high temperatures. Its composition of nickel, chromium, and silicon allows it to withstand high temperatures and is suitable for a variety of applications. In addition, its high nickel content helps make it tolerant to alkaline and reducing environments. The nickel also helps with its resistance to sulfuric compounds.
Back