Inconel 601 (UNS No. N06601) - Nickle Alloy Forged Fittings
| Raw Material | Inconel 601 (UNS No. N06601) |
|---|---|
| C % | 0.10 Max. |
| Mn % | 1.0 Max. |
| S % | 0.015 Max. |
| Si % | 1.00 Max. |
| Cr % | 21.00-25.00 |
| Ni % | 58.00-63.00 |
Nickle Alloy INCONEL 601 (UNS NO. N06601) Fittings Manufacturers, Exporters & Suppliers in India
One of the most important alloys for many different applications is INCONEL 601 superalloy. Its nickel-iron-chromium composition contains aluminum, which contributes to its excellent resistance to high-temperature corrosion. It also exhibits a range of excellent mechanical properties that are suitable for elevated temperatures. This alloy is widely used in the pharmaceutical, food, and caffeine industries. As a result of its excellent mechanical properties, it is also commonly referred to as INCONEL 601 Stainless-Steel.
The highest temperature that Inconel 601 plates can be subjected to is 2100 o F, and this alloy is resistant to oxidation. However, heat treatment does not work effectively on Inconel 601, which is why cold work and annealing are recommended for various ranges of strength and hardness.
Annealing is a process wherein Inconel 601 is heated to 2100 degrees Fahrenheit and then quickly cooled from 1000 to 1400 degrees F. Rapid cooling has no effect on its mechanical properties, but it does cause it to be brittle. Using a rapid cooling process is recommended in situations where you need to make a fast-turning part.
Inconel 601 is also used for pipe fittings. Its seamless pipe is available in 4" NB, while larger sizes are available in welded construction. These are available in various sizes and can be ordered to fit your needs. You can even get redrawn tubes or another tight tolerance tubing in custom sizes. American Special Metals, Corp., Inconel 601, is the registered trademark of Special Metals Corporation.
The INCONEL 601 alloy has a high temperature oxidation resistance of up to 1260degC. The protective oxide coating also prevents scaling even in extreme conditions. In addition, it has good resistance to carburization, nitridation, and sulfur, but should be avoided in reducing sulfur atmospheres. ALLOY 20 (UNS NO. N08020) is air-cooled to room temperature. It is used to make fasteners and valves, and it is widely used for general-purpose applications.
INCONEL 601 is an alloy of nickel and chromium with excellent corrosion resistance. It is used for high-temperature equipment in the chemical and petrochemical industries. Its corrosion resistance, strength, and toughness make it an excellent choice for various industrial sectors. Its high-temperature capabilities make it a desirable material for jet engines and petrochemical processing equipment. It is also used in jet-engine igniters, exhaust systems, and combustion chambers.
INCONEL 601 is an austenitic nickel-chromium alloy. It is highly resistant to oxidation up to 2200degF and is capable of resisting spalling. It is also highly resistant to corrosion in aqueous environments. Although its resistance is limited, Inconel 601 is highly versatile and suitable for many applications. It is available from Austral Wright Metals. If you are looking to purchase INCONEL 601, please contact our company today! You can also request a quote for this alloy from our website!
Back