S 32750 - Stainless Steel Hot Induction Bends
| Raw Material | ASTM A 815 Gr. WPS32750 Ed. 2020 |
|---|---|
| C % | 0.030 Max. |
| Mn % | 1.20 Max. |
| P % | 0.035 Max. |
| S % | 0.020 Max. |
| Si % | 0.080 Max. |
| Cr % | 24.00-26.00 |
| Mo % | 3.00-5.00 |
| Ni % | 6.00-8.00 |
| Cu % | 0.50 Max. |
| N % | 0.24-0.32 |
S 32750 Stainless Hot Induction Bends Manufacturers, Exporters & Suppliers in India
S 32750 Hot Induction Bends are a type of bending machine. These benders have high-quality induction arcs and are made of carbon steel. To increase the durability and life of these products, the furnace process involves a series of steps.
Among them is the application of a full-body heat treatment, which restores or improves the mechanical properties of the curved component. This process is most suitable for carbon steel and is followed by a period of cooling in still air.
The resulting products are known for their quality, consistency and reliability. Therefore, if you are looking for high-quality Bends buttweld fittings, Chamunda Industries is the best choice for you.
304L Stainless steel pipe is also a favorite material for induction bending. It is available in seamless and welded forms. Induction bends are also compatible with custom outside diameters and wall thicknesses. In addition, the company can accommodate the bending of stainless steel. Stainless steels are used in the chemical, water, and food industries.
You can choose the right product based on its properties and the quality of the finish. UNS S32750 Hot Induction Bends are manufactured using the latest technology. Super duplex steel pipe bends are suitable for drainage systems and are made of high-grade raw materials. They are elongated and come in a variety of sizes and shapes.
The company offers S32750 Hot Induction Bends, 2507 Long Radius Bend, and 2507 U Pipe Bend. This bend is a combination of stainless steel and duplex steel.
Hot Induction Bends are also called "hot rolling" and "hot bending" since the material is heated during the bending process. The induction coils are usually placed around the pipe being bent. The steel is then heated up to 800-2200 degrees Fahrenheit before it is shaped into the desired shape.
This process is also very economical, as you do not need to purchase any special equipment to get the job done. Hot Induction Bends are also used for pipelines. These bending machines are very efficient and can handle large sections of pipe.
The hot induction method is very quick, with few errors. The radius of a hot induction bend is determined by the nominal diameter of the pipe. S 32750 Hot Induction Bends are suitable for carbon steel, low alloy, and bi-metal alloys. If you are looking for a high-quality bending machine, you can visit Excel Metal's online store and choose from the many available options.
Back